Timber defects as written below are not permitted or limited as shown: Blue Stain (Limited surface mould NOT resulting in blue stain is permitted) 1.iln Stain (Should not be evidenced after surface planing with minimum stock removal of 2.0mm per face) 2.Wane (except as provided in RW by WWPA) 3.End Checking/Splits (No longer than 50mm) 4.Excessive Surface checking/Internal collapse 5.Excessive Resin content or massed Pitch so as to prevent clear finishing. 6.No more than 5% by volume of any pack shall be permitted undersize. Undersize is defined as exceeding 5% of nominal invoiced dimension as measured in the central 1/3 of any board.
All stock is currently kiln dried rough sawn and is offered subject to prior sale. Stock lengths are 1.8-6.0m random length. Unit for above stock is M3 ( Cubic Meter ).
Sizes Available for All Lumber Grades
Thicknesses: 25mm, 32mm, 40mm, 50mm, 75mm, 100mm Widths: 50mm, 75mm, 100mm, 125mm, 150mm, 200mm. By Special Request: 250mm, 300mm Lengths: 1.8 metres to 6.0 metres Other Lengths by special request
DOUGLAS FIR ,S4SEE,MSR GRADE
size:2x4"/6"/8"/10"
length:2',3',short size.
Douglas fir,KD/S4SEE
2X8"/10"X length: 2'/3'
2x4"/6"/8"/10" x3m,4m
